N2R High Clearance Skid for TF2 v5 N2R High Clearance Skid for TF2 v5 V5 has been updated to work with the new RC4WD Over/Under Drive Transfer Case Gain approx. 6mm in ground clearance vs. the stock TF2 skid
SKU: BTF-0015S
BowHouse RC

N2R High Clearance Skid for TF2 v5

$19.99

We have updated our legendary N2R High Clearance Skid for the RC4WD Trail Finder 2 (TF2) to support RC4WD's new Over/Under Drive Transfer Case (part Z-U0039) as well as the original Hammer Transfer Case that comes stock on the TF2. And we've done it without sacrificing any of the epic ground clearance you've come to expect!

Features:

  • Works with all versions of the TF2 (standard wheelbase, long wheelbase (LWB) and short wheelbase (SWB))
  • Works with both versions of the R3 transmission (single-speed and 2-speed)
  • Works with both leaf spring and linked suspension setups
  • Works with both Hammer and Over/Under Drive Transfer Cases

Notes:

  • We recommend our N2R Coupling Bracket if you are installing on a TF2 LWB.
  • We recommend using longer screws and M3 nylock nuts to mount to the chassis.

So go ahead...ditch the stock snow shovel and start sliding your TF2 over the rocks with ease.

Full Description
Qty
  • Description

    We have updated our legendary N2R High Clearance Skid for the RC4WD Trail Finder 2 (TF2) to support RC4WD's new Over/Under Drive Transfer Case (part Z-U0039) as well as the original Hammer Transfer Case that comes stock on the TF2. And we've done it without sacrificing any of the epic ground clearance you've come to expect!

    Features:

    • Works with all versions of the TF2 (standard wheelbase, long wheelbase (LWB) and short wheelbase (SWB))
    • Works with both versions of the R3 transmission (single-speed and 2-speed)
    • Works with both leaf spring and linked suspension setups
    • Works with both Hammer and Over/Under Drive Transfer Cases

    Notes:

    • We recommend our N2R Coupling Bracket if you are installing on a TF2 LWB.
    • We recommend using longer screws and M3 nylock nuts to mount to the chassis.

    So go ahead...ditch the stock snow shovel and start sliding your TF2 over the rocks with ease.

  • Reviews

    Reviews

    Jake

    Skid

    Killer skid installed easily, doesn't hang up like the factory one and takes a beating, was worried about it because of its 3d printed. Best mod so far.
  • Details

    Details

    Current Stock:
    SKU: BTF-0015S
    Width: 3.0 (in)
    Height: 1.0 (in)
    Depth: 7.0 (in)