COMING SOON!!!

These are the side battery stays to accompany our Carbon Fiber Battery Tie-Down for DR10 when used on the Drag Race Concepts carbon fiber chassis.  These come 2 per package.  For full-length stick packs, we recommend using 2 pairs of side stays.  You can also use the stock steering servo post-style brackets as side stays when secured to the chassis with M3 screws through the battery strap slots.

For more information, visit the product page for our Carbon Fiber Battery Tie-Down System:

Carbon Fiber Battery Tie-Down for DR10

For some killer Helios RC 2S 6000 100C racing lipos, visit Helios RC:

https://heliosrc.com/2s-6000-mah-100c-racing-lipo/

Note for other carbon fiber chassis setups:

We have not tested our system with other carbon fiber chassis setups.  Our system should work on other setups as long as the relative positions of the rear bulkhead and steering servo mounts are the same as the stock chassis and there are no obstructions above the battery tray area or steering servo.  However, we cannot guarantee that our system will work on setups other than the ones we've tested. 

INCLUDES

1. One pair of side stays (2 pieces)
2. 2x M3x10mm BHCS screws

INSTALLATION NOTES

• Insert included M3x10mm screws through the battery strap slots in the lower chassis plate and attach side stays in your preferred locations depending on your battery placement.