N2R High Clearance Skid for Traxxas TRX-4 v2 N2R High Clearance Skid for Traxxas TRX-4 v2 N2R High Clearance Skid for Traxxas TRX-4 v2
SKU: BTX-0050C-V2
BowHouse RC

N2R High Clearance Skid for Traxxas TRX-4 v2

$40.00

This is the updated version of our popular N2R High Clearance Skid for the Traxxas TRX-4.  We have gained 4mm of additional ground clearance compared to the stock skid in critical areas, and we have created smoother surfaces with better angles for sliding over roots and rocks with ease.  V2 is printed in ultra strong, ultra high resolution nylon.

Package includes:

  • 1x skid
  • 1x M3x8 FHCS
  • 2x M3X16 BHCS
  • 1x M3x8 BHCS
  • 2x M3x30 BHCS

 

Installation notes

  • Reuse stock hardware in stock locations EXCEPT as follows:
    • (a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
    • (b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
    • (c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
    • (d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
  • Completely remove side tray on right side before installing N2R skid
  • Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
  • Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
  • Tighten all screws by hand and be careful not to overtighten.  Use of power drivers may result in stripping out screw holes in the N2R skid.
Full Description
Qty
  • Description

    This is the updated version of our popular N2R High Clearance Skid for the Traxxas TRX-4.  We have gained 4mm of additional ground clearance compared to the stock skid in critical areas, and we have created smoother surfaces with better angles for sliding over roots and rocks with ease.  V2 is printed in ultra strong, ultra high resolution nylon.

    Package includes:

    • 1x skid
    • 1x M3x8 FHCS
    • 2x M3X16 BHCS
    • 1x M3x8 BHCS
    • 2x M3x30 BHCS

     

    Installation notes

    • Reuse stock hardware in stock locations EXCEPT as follows:
      • (a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
      • (b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
      • (c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
      • (d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
    • Completely remove side tray on right side before installing N2R skid
    • Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
    • Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
    • Tighten all screws by hand and be careful not to overtighten.  Use of power drivers may result in stripping out screw holes in the N2R skid.
  • Reviews

    Reviews

    Brunson Wolfe

    Trx4 sport skid plate

    Excellent product. Really is the way to go for a skid. Everything was perfectly aligned for bolts. Thanks for continuing to make a great product.
    John

    Worth every penny!

    This made such a huge difference on my TRX-4 when crawling on rough terrain. It looks better, it performs better, it's just.... Better!
    Steve Dyarman

    High clearance skid

    Very nice probuct gives a little more clearance and smoother surface for going over obstacles.
    Mickey

    Low profile skidplate on my trx-6.

    The only thing i had to do was tapping the holes and it bolted right in. Nice job, thanks!
    Rob Black

    High clearance skid

    I like it. My rig just slides over rocks like a 70’s cop over a car hood. Highly recommended if you enjoy smiles and happiness.
    Mark Springer

    Big difference

    Looks good and fits perfectly on my trx4 2021 Bronco
    Christopher Jones

    high clearance skid for traxxas trx-4 v2

    Fitment was spot on, material in nice quality, tucked links up nice and low.
    Grant Dickerson

    NR2 High clearance skid

    Awesome upgrade for the Trx4 or Trx6, high quality, big clearance gains and a great price. What's not to love about this skid plate?
    Waldo Quinney

    High clearance skid

    Great quality and fit perfectly.
    Kenny brown

    Trx4 vw skid

    Very nice quality. Really happy with the product. Also have the battery tray
  • Details

    Details

    Current Stock:
    SKU: BTX-0050C-V2
    Width: 4.0 (in)
    Height: 7.0 (in)
    Depth: 2.0 (in)
  • Videos

    Videos